Stainless Steel Bright Bars,Stainless Steel Bars Manufacturers,Stainless Steel Bars Exporter,India

CEO's Message

ENQUIRY FORM

We seek opportunities to repesent overseas suppliers...

Home

Ferrous Metal Products

Flat Products

Steel Strips

Cold Rolled Steel Sheets

Galvanized Steel

Perforated Sheet, Wire Mesh & Wedge Wire Screen

Stainless Steel Strips

Non Ferrous Metal Products

Copper Tubes

Copper & Brass Strips

Engineering Products

Home » Ferrous Metal Products » Long Products » Bars & Shafts

Stainless Steel Bright Bars & Shafts

Alloy/Non-Alloy Steel Bars & Shafts

Stainless Steel Bright Bars & Shafts

send enquiry...

Grades - Chemical Composition and Equivalent Standards

Download PDF

Product Variations/ Specifications

Sizes :-

Rounds
25,26, 27.5, 28.3, 30, 30.5, 32.5, 34, 36, 38, 40, 42, 45, 48, 50, 53, 56, 56.4, 60, 63, 65, 70, 75, 80, 85 & 90 mm Dai.
Squares
50mm, 63mm, 75, 80, 100, 120, 125, 130, 160.

send enquiry...

Condition :-

Grade	Size Range	Conditions of supply
300 series	25 - 90 mm dia.	As rolled and machine straightened. Solution annealed and machine straightened.
400 series	25 - 90mm dia.	Annealed and machine straightened. Hardened + Tempered M/c straightened.
300 series	50mm - 100mm Sq.120 - 160 mm	Hot rolled + Spot ground. Hot rolled + Machine ground if specified by Customer.

Dimensional Tolerance :-

1. Dia. Tolerance

Size Range (including )	Tolerance	Ovality
25 - 50 mm dia.	± 0.40	0.60 mm
50 - 80 mm dia.	+ 0.80 - 0.00	0.80 mm
80 - 90 mm dia.	+ 1.20 - 0	0.00 mm

2. Length
Length specified by customer with a tolerance of ± 0.30m upto maximum length of.6.4m, With 10% shorts down to 3 meters.

send enquiry...

Surface Quality :-
Visual examination shall be carried out to ensure freedom from harmful surface defects.

Localized spot dressing shall be done to remove surface defects, if agreed by customer.

Mechanical Properties :-

1. Certification

Grade	Condition	Remarks
300 series	As rolled	Normally only chemistry shall be certified. Where agreed by customer indicative values of UTS, % E, % RA and hardness shall be given in hot rolled condition or samples shall be tested in solution annealed condition and values certified .
300 series	Solution annealed	YS, UTS, % E, % RA and hardness as per ASTM, DIN and JIS specifications.
400 series	As rolled	- No-
400 series	Annealed Tempered	Hardness max. Values. Hardness range of 50 BHN.

2. Mechanical Properties Typical Values

Grade	Size Range	Condn.	YS	UTS	% E	% RA	BHN
300 series	25-45 mm dia 50-90 mm dia.	As rolled Solution annealed As rolled Solution Annealed	30/40 23/26 30/40 23/26	60/72 55/63 62/68 52/60	47/55 55/68 48/58 60/70	60/75 70/80 60/75 70/80	200 Max. 180 Max. 185 Max. 170 Max.

	Grade	Hardness HB
400Series	410	160-200	230-270
	416	180 Max.	210-250
	420	200 Max.	230-270
	430 F	165-190	200-260
	431	230-270
	( * Hardness at centre upto 38 mm dia. Bars and mid-centre for sizes >38 mm Dia.)

send enquiry...

Identification :-

Each and every bar shall be identified by the grade's color code at one cross section. The heat number shall be painted on the surface of minimum of 10 % of bars in the bundle.
45 mm diameter to 90mm diameter :
Each and every bar shall be identified by the grades color code on one cross section and heat number.

Each bundle shall be identified by a metallic tag giving details of heat number, grade,section, length and customer's name/shipping marks.

End Cut :-

Bars from 25mm to 42mm diameter shall be COLD SHEARED and bars from 45mm to 90mm diameter shall be HOT SAW CUT.
Standard Specification For Stainless Steel Bright Bars

Size & Supply Condition

Grade	Size Range	Supply Condition
300 Series	3 mm - < 6 mm	A +CD+P
	6 mm - 10 mm	A+CD+P or HR+CD+P
	>10 mm - 23 mm	A+CD+CG/P or HR+CD+CG / P
	>23 mm - 80 mm	A+SMT+P/CG
400 Series	6 mm- 23mm	A+CD+P/CG
	23 mm - 80 mm	A+SMT+P/CG, T+SMT+P/Cg

send enquiry...

Note : A = Solution Annealed, HR = Hot rolled, CD = Cold Drawn, P = Polished, CG = Cenreless Ground, SMT = Smooth turned, T = Tempered
Dimensional Quality
Diameter Tolerance

Size	Dia. Tolerance
3 mm - 23 mm	h-9 tol or ASTM A484
>23.0 mm - 80.0 mm	mm h9/h10 Tol. Or ASTM A484

Length Tolerance

Size	Length Tolerance (Min.)
3.0 mm - < 6 mm	50 mm
6 mm - 12 mm	200 mm
12 mm - 23 mm	100 mm
23 mm - 80 mm	50 mm

Mechanical Properties :-

Grade	Remarks
300 Series except 303	Shall be as per popular ASTM Standards like A182, A193, A276, A479, A484, A580, ASME Standards like SA 182, SA 193, SA 479 and respective AMS Standards like AMS 5639, 5647, 5648, 5653.
303	Shall be as per popular ASTM standards like. ASTM A582, A484 & AMS 5640P, & respective AMS Standards 5612, 5013.
400 Series except 416 & 430 F	Shall be as per popular ASTM Standards like A276 & respective AMS Standards 5612, 5013
430 F	As per ASTM A582 & AMS 561

send enquiry...

Stainless Steel Wire Rods

Chemistry : As per Table
Supply Condition

Size Range	Grades	Condition
5.5 mm - 23.0 mm	300 series & 400 series	Hot rolled annealed & pickled 9HRAP )

Special Requirements :-

GRAIN SIZE

5 -8 IN SOLUTION ANNEALED CONDITION AS PER ASTM E12

INCLUSION	TYPE	THIN SERIES	THICK SERIES
	SULPHIDE (A)	2.0 (MAX)	2.0 (MAX)
	ALUMINA (B)	1.5 (MAX)	2.5 (MAX)
	SILICATE (C)	1.5 (MAX)	2.0 (MAX)
	OXIDE (D)	1.5 (MAX)	2.0 (MAX)

FERRITE CONTENT

DELTA FERRITE CAN BE COMMITTED TO 3% MAX VALUE FOR BAR OF 90 MM DIA & BELOW IN SOLUTION ANNEALED CONDITION

MACRO ETCHING

AS PER E381 IT SHALL BE FREE FROM ANY INDICATION IN PLATE II & ACCEPTABLE LIMIT AS PER PLATE I SHALL BE S2, R2,C2

IGC TEST

AS PER ASTM A262 PRACTICE A OR E

MICRO STRUCTURE

BARS SHALL BE FREE FROM CHROMIUM CARBIDE NETWORK OR ANY COMPLEX CARBIDE & SIGMAPHASE

ULTRASONIC TESTING

FOR INTERNAL SOUNDNESS, BARS SHALL BE SUBJECTD TO ULTRASONIC TEST AS PER ASTM A 338 AS AND WHEN REFERRED IN CONTRACT

send enquiry...

Packing Options
Material shall be supplied in bundles of 2.5+/-0.5 MT and tied with signode strap or wires.

Product Testing

Test Certificate :-

The Test Certificate shall include the following details :

Challan number and date.
Heat Number
Grade
Section (size)
Quantity
Supply condition
Chemical composition
Mechanical properties (YS, UTS, % Elongation, % RA and Hardness).
Section quench test for 400 series.
Special requirements if agreed at the time of accepting order.

Special Requirements :-
The basic guidelines are given in Certification table.

Technical requirements other than those stated above shall above shall be accepted After Contract review.

Grades - Chemical Composition and Equivalent Standards

Download PDF

Stainless Steel Bright Bars & Shafts

Alloy/Non-Alloy Steel Bars & Shafts

¤ PRODUCTS RANGE ¤

Ferrous Metal Products
Flat Products	Steel Strips \| Cold Rolled Steel Sheets Galvanized Steel \| Perforated Sheet, Wire Mesh & Wedge Wire Screen Stainless Steel Strips
Long Products	Bars & Shafts \| Wires \| Forgings Products
Non Ferrous Metal Products
Copper Tubes \| Copper & Brass Strips \| Aluminium \| Cupronickel Tubes \| Copper Flats \| Copper Rods
Engineering Products
Electric Motors \| Capacitors \| Bearings & Bushes